- Microcoil heaters
-
Cartridge heaters
Without thermocouple With thermocouple Special executions
-
Band heaters
Flat Mica Heaters Nozzle heater Mica heat band heaters Ceramic band heaters
-
Thermocouples
Thermocouples model TC-11 Thermocouples Model TC5 Thermocouples model TC8 Model TC-1 (anchor point) Model TC-3
- Tubular heaters
- Spiral heaters
- Infrared heaters
- Drum heaters
Medium Charge
MEDIUM CHARGE CARTRIDGE HEATERS
CMD SERIES presents cartridge heater a further development of existing conventional type
When working conditions are not very demanding, this series is an alternative to HIGH DENSITY cartridges
HD
MEDIUM DENSITY CARTRIDGE used in mainly
measures in long, do not bear a high load per square centimeter (up to 10 watts)
|
Diameter (metric & imperial sizes) and Tollerances
|
||||||||||
|
Ø
|
6,5
|
8
|
10
|
12,5
|
16
|
20
|
1/4"
|
3/8"
|
1/2"
|
5/8"
|
|
Tollerance
|
-0,03 | -0,04 | -0,04 | -0,05 | -0,05 | -0,06 | -0,03 | -0,04 | -0,05 | -0,05 |
| -0,05 | -0,06 | -0,07 | -0,08 | -0,08 | -0,1 | -0,05 | -0,07 | -0,08 | -0,05 | |
|
Length Tollerance
|
Relative ±1,5% | |||||||||
| Absolute ±1mm (minimum) | ||||||||||
|
Cold insolution Resistance 500 V-DC
|
≥ 10 MΩ | |||||||||
|
Dielectric Strength
|
1500 V | |||||||||
|
Maximum leakage current (cold)
|
≤ 0,5 mA | |||||||||
|
Cold Wattage Tollerance
|
±10% | |||||||||
|
Maximum Power Density
|
10 W/cm2 | |||||||||
|
Unheated Zones Length
|
Cables Zone nearly 15 mm | |||||||||
| Bottom Disc Zone nearly 15 mm | ||||||||||
|
Maximum Working Temperature
|
550/600ºC on the external sheath | |||||||||